Seal&Finish 1 Gallon
(Pack of 4)

SKU:1710087 Item#: 1710087

OKON®

Lock in the look of fresh concrete or masonry. When applied to horizontal, light-use surfaces, this sealer deeply penetrates to provide easy-to-clean, water- and stain-resistant protection.
• Ideal for patios, walkways, basements, etc.; not recommended for driveways/garages
• Clear, non-yellowing, low-gloss; breathable; water-based, VOCs below 100
• Ready to use; can touch-up or recoat; no acid etching required
• Practical Coverage Rate (sq.ft./gal.) (assume 15% material loss) - Surface: Rough (Broom Finish, Smooth (Float Finish), Very-Smooth (Trowel Finish)
• Practical Coverage Rate (sq.ft./gal.) (assume 15% material loss) - 1 st Coat: Rough (Broom Finish - 150, Smooth (Float Finish) - 200, Very-Smooth (Trowel Finish) - 300
• Practical Coverage Rate (sq.ft./gal.) (assume 15% material loss) - 2 nd Coat: Rough (Broom Finish - 250, Smooth (Float Finish) - 300, Very-Smooth (Trowel Finish) - 400
• Dry Times at 70-80°F (21-27ºC) and 50% Relative Humidity - Recoat: 3 hours or when dry to touch
• Dry Times at 70-80°F (21-27ºC) and 50% Relative Humidity - Foot Traffic: 12 hours

Read More

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Product Description

Lock in the look of fresh concrete or masonry. When applied to horizontal, light-use surfaces, this sealer deeply penetrates to provide easy-to-clean, water- and stain-resistant protection.
• Ideal for patios, walkways, basements, etc.; not recommended for driveways/garages
• Clear, non-yellowing, low-gloss; breathable; water-based, VOCs below 100
• Ready to use; can touch-up or recoat; no acid etching required
• Practical Coverage Rate (sq.ft./gal.) (assume 15% material loss) - Surface: Rough (Broom Finish, Smooth (Float Finish), Very-Smooth (Trowel Finish)
• Practical Coverage Rate (sq.ft./gal.) (assume 15% material loss) - 1 st Coat: Rough (Broom Finish - 150, Smooth (Float Finish) - 200, Very-Smooth (Trowel Finish) - 300
• Practical Coverage Rate (sq.ft./gal.) (assume 15% material loss) - 2 nd Coat: Rough (Broom Finish - 250, Smooth (Float Finish) - 300, Very-Smooth (Trowel Finish) - 400
• Dry Times at 70-80°F (21-27ºC) and 50% Relative Humidity - Recoat: 3 hours or when dry to touch
• Dry Times at 70-80°F (21-27ºC) and 50% Relative Humidity - Foot Traffic: 12 hours

Technical Specifications

Item#: 1710087
Manufacturer Model #: OK941
Type Floor Sealer
Style Concrete
Full Cure Time 24 h
Container Type Can
Size 1 gal
Color Clear
Coverage Up to 300 ft²
Cure Time 24 h
Dry Time 12 h
Dry Time (To Touch) 12 h
UNSPSC #: 31201701
TAA Compliant: Yes

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Your Recently Viewed Items