Self-Piercing Rivet 5.3 x 4mm
(Pack of
25)
Self-piercing rivets are the most common fastening method used by the OEMs. They are specially-coated steel rivets that pierce the outer body panel and mushroom into the inner body panel without piercing it. A special coating, usually tin/zinc, prevents galvanic corrosion. A special tool is used to press the rivet into place and it must have access to both sides of the panel. Self-piercing rivets are used on aluminum body panels because they duplicate the performance of spot welds without heating the aluminum.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 6-341
Frequently Bought Together

Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability

Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability

Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability

Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability

Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability

Hex Head Sheet Metal Screw with 17mm Washer Steel
Couldn't load pickup availability

Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability

Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability

Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability

Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability

Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability

Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability

Grip-Tite Blind Rivet Rear Window Weatherstrip
Couldn't load pickup availability

Grip-Tite Blind Rivet Nylon 1/4"
Couldn't load pickup availability

Self-Piercing Rivet Assortment
Couldn't load pickup availability
Product Description
Self-piercing rivets are the most common fastening method used by the OEMs. They are specially-coated steel rivets that pierce the outer body panel and mushroom into the inner body panel without piercing it. A special coating, usually tin/zinc, prevents galvanic corrosion. A special tool is used to press the rivet into place and it must have access to both sides of the panel. Self-piercing rivets are used on aluminum body panels because they duplicate the performance of spot welds without heating the aluminum.Technical Specifications
Item#: | 1489000 |
---|---|
Type | Self-Piercing Rivet |
Body Diameter | 5.3 mm |
Rivet Length | 4.0 mm |
Quantity Per Package | 25.0000 |
UNSPSC #: | 31162200 |
TAA Compliant: | No |
Weight: | 0.05 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

