SnapSkru® Self-Drilling Wall Anchor Kit, Nylon, #6 to #8 Screw Diameter, 100 Pieces
(Pack of
1)
SKU:18285 Item#: 18285
18285 Contains:50 SnapSkru™ Mini Anchors (No. 18284) and 50 No. 6 x 1-1/4" Phillips Pan Head Sheet Metal Screws (No. 98385)
• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Frequently Bought Together
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 555Pcs
$0.00
Couldn't load pickup availability
Hollow Wall Screw Anchor Assortment 195Pcs
$0.00
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M10-1.5
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 1/8"
$0.00
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Product Description
18285 Contains:50 SnapSkru™ Mini Anchors (No. 18284) and 50 No. 6 x 1-1/4" Phillips Pan Head Sheet Metal Screws (No. 98385)• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Technical Specifications
| Item#: | 18285 |
|---|---|
| Type | Wall Anchors |
| Material | Nylon |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.61 lb |
