Solderless Glass Fuse In-Line Fuse Holder, 32 Volts, 30 Amps, Suitable for 1/4" Diameter Fuses
(Pack of
10)
SKU:94877 Item#: 94877
• Accepts three sizes of 1/4" dia. fuses: 1/4" x 7/8", 1/4" x 1" and 1/4" x 1-1/4"
• Rated 30A, 32V
Installation1. Strip insulation from wire (approximately 3/8").2. Insert wire in holder.3. Crimp terminal through body.4. Repeat steps 1 – 3 for other half of holder.5. Insert fuse.6. Snap housing together.
Frequently Bought Together
Miniature Incandescent Bulb 12V 12CP
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Fuseholder Micro2 Add-A-Circuit
$0.00
Couldn't load pickup availability
Smart Glow In-Line Fuse Holder 32V 30A
$0.00
Couldn't load pickup availability
30 AMP Water Safe Mini ATO Blade Fuse Holder
$0.00
Couldn't load pickup availability
MINI Fuse 25A Natural
$0.00
Couldn't load pickup availability
ATO/ATC Fuse 10A Red
$0.00
Couldn't load pickup availability
Low-Profile MINI Fuse 25A Natural
$0.00
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
$0.00
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
$0.00
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Product Description
• Accepts three sizes of 1/4" dia. fuses: 1/4" x 7/8", 1/4" x 1" and 1/4" x 1-1/4"• Rated 30A, 32V
Installation1. Strip insulation from wire (approximately 3/8").2. Insert wire in holder.3. Crimp terminal through body.4. Repeat steps 1 – 3 for other half of holder.5. Insert fuse.6. Snap housing together.
Technical Specifications
| Item#: | 94877 |
|---|---|
| Type | Solderless |
| UNSPSC #: | 39121624 |
| TAA Compliant: | Yes |
| Weight: | 0.17 lb |
