Solid Drill Bit, Carbide, Titanium Carbonitride Finish, 135° Point, 1/2" Flute Length, 1/8 x 1-7/8"
(Pack of
1)
SKU:P58026 Item#: P58026
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge
• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryo Armor Cut 1/8" Dia. Drill Bit, Carbide 118o Point
$0.00
Couldn't load pickup availability
Cryo Armor Cut 25/64" Dia. Drill Bit, Carbide 118o Point
$0.00
Couldn't load pickup availability
Cryo Armor Cut 11/16" Dia. Drill Bit, Carbide 118o Point
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
$0.00
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
$0.00
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Product Description
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | P58026 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Titanium CarboNitride |
| Diameter | 1/8 " |
| Decimal Equivalent | 0.1250 " |
| Point | 135 ° |
| Flutes | 3 |
| Flute Length | 1/2 " |
| Overall Length | 1-7/8 " |
| SAE Code | TD0CSX 0.1250 SB056 / 00.50 - 01.88 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.015 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
