Stainless Steel Crimped End Brush, 7/8" Stem, 1" Outer Diameter, 1/4" Shank Diameter, 7/8" Shank Length, 22000RPM Operating Speed
(Pack of
1)
SKU:91987 Item#: 91987
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Stainless steel brushes are used where contamination or rust is a problem, for example, brushing aluminum or stainless steel parts
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog page#: 10-65
Frequently Bought Together
Nylon Bore Tube Brush 5/16"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
$0.00
Couldn't load pickup availability
Steel Crimped End Brush 1"
$0.00
Couldn't load pickup availability
Steel Crimped End Brush 1"
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 15mm
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
Product Description
• Outlast standard brushes by at least 2-to-1• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Stainless steel brushes are used where contamination or rust is a problem, for example, brushing aluminum or stainless steel parts
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 91987 |
|---|---|
| Type | Crimped |
| Material | Stainless Steel |
| O.D. | 1 " |
| Wire Gauge | 0.010 " |
| Maximum RPM | 22,000 |
| Shank Size | 1/4 " |
| Shank Length | 7/8 " |
| UNSPSC #: | 27111907 |
| TAA Compliant: | Yes |
| Weight: | 0.2 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
