Steel Expansion Plug, Concave Style, Zinc Plated, Clean Hole with Tuff-Grit™ Screen Mesh, 1-3/8"
(Pack of 25)

SKU:3058 Item#: 3058

Kent Automotive

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Check Availability

Usually Ships: Today

While Supplies Last

Quantity

Catalog page#: 7-20

Frequently Bought Together

Shield Push-Type Retainer with Metal Insert

Rocker Panel Molding Clip Nylon White 12 x 20mm

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Steel Expansion Plug Shallow 1-1/4"

Rubber Expansion Plug 1-1/2"

Rubber Expansion Plug 1-1/4"

Shield Push-Type Retainer with Metal Insert

Rocker Panel Molding Clip Nylon White 12 x 20mm

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Copper Drain Plug Gasket/Sealing Ring M18 x M26

Aluminum Washers - 14x22

Magnetic Oil Drain Plug with Gasket

Shield Push-Type Retainer with Metal Insert

Rocker Panel Molding Clip Nylon White 12 x 20mm

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300

Adhesion Promoter - 16oz

Acid Brush 3/8 x 5-3/4"

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300

Adhesion Promoter - 16oz

Acid Brush 3/8 x 5-3/4"

Product Description

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Technical Specifications

Item#:	3058
Style	Concave
Size	1-3/8 "
Material	Steel
Plating	Zinc
UNSPSC #:	25174000
TAA Compliant:	Yes
Weight:	0.96 lb

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Fender Apron Drive Rivet 8mm Hole

Engine Under Cover Drive Rivet Plastic 7mm Hole

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Bumper Push-Type Retainer Nylon 18mm

Bumper Radiator and Grille Drive Rivet 7mm Hole

Push-Type Retainer Nylon 16 x 19mm

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Splash Shield Push Rivet Nylon 7mm Hole

Your Recently Viewed Items