Stem Units with Molded Stem Pilot Wire 3/8 Inch 10 mm
(Pack of
20)
SKU:1708125 Item#: 1708125
For passenger and light truck tires seals tire injuries to prevent tire failure. Stem insert repair units are a fully cushion wrapped stem with guide wire for ease of installation. A small diameter pilot wire is molded into the stem unit for easy insertion into the tire. After insertion, the properly selected patch is installed over the stem creating a permanent repair.
• For permanent repair and best results, always use an appropriate size carbide cutter, and chemical cement
• Always use if an injury angle is more than 25 degrees
Frequently Bought Together
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
$0.00
Couldn't load pickup availability
Tire Repair Valve Green Plastic Cap
$0.00
Couldn't load pickup availability
On-The-Wheel Tire Repair String 4"
$0.00
Couldn't load pickup availability
Tire Bead Sealer 1 Quart
$0.00
Couldn't load pickup availability
Pistol Grip Tire Probe
$0.00
Couldn't load pickup availability
Replacement Needle Shaft
$0.00
Couldn't load pickup availability
Tire Repair Bias-Ply Chemical Cure Patch 3"
$0.00
Couldn't load pickup availability
Product Description
For passenger and light truck tires seals tire injuries to prevent tire failure. Stem insert repair units are a fully cushion wrapped stem with guide wire for ease of installation. A small diameter pilot wire is molded into the stem unit for easy insertion into the tire. After insertion, the properly selected patch is installed over the stem creating a permanent repair.• For permanent repair and best results, always use an appropriate size carbide cutter, and chemical cement
• Always use if an injury angle is more than 25 degrees
Technical Specifications
| Item#: | 1708125 |
|---|---|
| Manufacturer Model #: | KX-379 |
| Type | Pilot Wire |
| Category | Tire Repair |
| Diameter | 3/8 " |
| UNSPSC #: | 27112200 |
| TAA Compliant: | No |
