TIG Welding Tungsten Electrode, Gold Tipped, 1.5% Lanthanated, 7" Length, 1/16"
(Pack of
10)
• Non-radioactive Lanthanum Tungsten TIG electrodes eliminate the potential of interference with special equipment and reduces rate of vaporization or burn-off
• Will operate with alternating current or direct current either polarity
• The addition of lanthanum also lowers the temperature at which the electrode emits electrons allowing the electrode to operate cooler so higher currents can be used
• Lanthanum improves arc initiation and arc stability
• Longer life
• Less contamination
• Length: 7" (18cm)
• Identification: gold tipped
• Meets AWS specifications for EWLa-2
NOTE: Use argon shielding gas with a gas lens collet body for optimum performance.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Bumper Cover Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
9V/HW20 TIG Welding Ceramic Gas Cup #10
Couldn't load pickup availability
9V/HW20 TIG Welding Ceramic Gas Cup #4
Couldn't load pickup availability
9V/HW20 TIG Welding Standard Collet Body 1/16"
Couldn't load pickup availability
Flat Soapstone 1/2"
Couldn't load pickup availability
Pipe Wrap Around
Couldn't load pickup availability
Anti Splatter Heat Resistant Welding Mat 2 x 3'
Couldn't load pickup availability
SR17/18 TIG Welding Alumina Gas Cup #10
Couldn't load pickup availability
Oxy Acetylene Oxygen Check Valve
Couldn't load pickup availability
169729 MIG Welding Adapter Nozzle
Couldn't load pickup availability
Product Description
• Non-radioactive Lanthanum Tungsten TIG electrodes eliminate the potential of interference with special equipment and reduces rate of vaporization or burn-off• Will operate with alternating current or direct current either polarity
• The addition of lanthanum also lowers the temperature at which the electrode emits electrons allowing the electrode to operate cooler so higher currents can be used
• Lanthanum improves arc initiation and arc stability
• Longer life
• Less contamination
• Length: 7" (18cm)
• Identification: gold tipped
• Meets AWS specifications for EWLa-2
NOTE: Use argon shielding gas with a gas lens collet body for optimum performance.
Technical Specifications
| Item#: | P14576 |
|---|---|
| Welding Process | TIG |
| Type | Lanthanated |
| Components | Tungsten Electrode |
| Diameter | 1/16 " |
| Length | 7 " |
| Description | 1.5% Lanthanated |
| UNSPSC #: | 23271700 |
| TAA Compliant: | No |
| Weight: | 0.23 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
