Tru-Shrink Heat Shrink Tubing 18 to 14 AWG Black
(Pack of
6.0)
Insulate and protect larger electrical wires with this heat shrink tubing. Designed to fit over thick electrical wires and ideal for applications like motor control, power distribution, and large appliance wiring. The tubing shrinks tightly around the wire to provide protection against moisture, dust, chemicals and other environmental factors that could cause damage. Manufactured for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present.
3:1 shrink ratio
Heat-activated adhesive liner surrounds material and produces a watertight seal
Non-corrosive with excellent fluid and fungus resistance non-nutrient, inert
Meets UL Flammability Test Specification 94V2 and UL Specification 486D
Elongation: 425%
Minimum tensile strength: 1,542 PSI
Minimum dielectric strength: 275V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 194°F (90°C)
Longitudinal change: 15% maximum, less than 5% typical
Rated at 600V
Designed for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together

Cable Tie Screw Mount #8 Screw White
Couldn't load pickup availability

Miniature Incandescent Bulb 12V
Couldn't load pickup availability

Halogen Miniature Bulb 55W 12V
Couldn't load pickup availability

Heat Shrink Tubing 12 to 10 AWG Black
Couldn't load pickup availability

Heat Shrink Tubing Black 0.75 x 12"
Couldn't load pickup availability

Tru-Shrink Heat Shrink Tubing 10 to 8 AWG Black
Couldn't load pickup availability

Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability

Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability

Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability

Rubber Grommet 11/16" ID
Couldn't load pickup availability

130C Linerless Rubber Splicing Tape Black 1" x 30'
Couldn't load pickup availability

Split Wire Loom Polyethylene Black 0.75" ID 25'
Couldn't load pickup availability
Product Description
Insulate and protect larger electrical wires with this heat shrink tubing. Designed to fit over thick electrical wires and ideal for applications like motor control, power distribution, and large appliance wiring. The tubing shrinks tightly around the wire to provide protection against moisture, dust, chemicals and other environmental factors that could cause damage. Manufactured for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present. 3:1 shrink ratio
Heat-activated adhesive liner surrounds material and produces a watertight seal
Non-corrosive with excellent fluid and fungus resistance non-nutrient, inert
Meets UL Flammability Test Specification 94V2 and UL Specification 486D
Elongation: 425%
Minimum tensile strength: 1,542 PSI
Minimum dielectric strength: 275V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 194°F (90°C)
Longitudinal change: 15% maximum, less than 5% typical
Rated at 600V
Designed for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Technical Specifications
Item#: | 99994 |
---|---|
Type | Pre-Cut |
Style | Heavy Wall |
Wire Gauge Coverage | 18-14 AWG |
Length | 6 " |
Color | Black |
I.D. Before Shrinkage | .300 " |
I.D. After Shrinkage | .100 " |
Shrink Ratio | 3 to 1 |
Wall Thickness After Shrinkage | 0.060 " |
Voltage Rating | 600 V |
Temperature Rating | 194 °F |
Elongation | 425 % |
Tensile Strength | 1,542 PSI |
Approvals | UL, CSA |
UNSPSC #: | 39121723 |
TAA Compliant: | Yes |
Weight: | 0.13 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
