Tubeless Tire Snap-In Valve, 1-1/2" Length, 14" Rim Diameter, 0.453" Hole Diameter
(Pack of 25)

Kent®

• Threaded inside and out for retaining valve core and exterior protective cap
• Locating ring provides secure seating and sealing
• Compression seal and valve base mount flush with rim contour and permit flexing without dislodging valve
• Resists temperature extremes and surge inflating
• Conforms to OEM and Tire and Rim Association specifications

Check Availability

Quantity

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Catalog page#: 5-33

Frequently Bought Together

Front Bumper Trim Panel/Running Board Split Rivet

Bumper Push-Type Retainer Nylon 18mm

Push-Type Retainer Nylon 16 x 19mm

Front Bumper Trim Panel/Running Board Split Rivet

Bumper Push-Type Retainer Nylon 18mm

Push-Type Retainer Nylon 16 x 19mm

Tabbed PSA Sandpaper Disc 6"

Tabbed PSA Sandpaper Disc 6"

Tabbed PSA Sandpaper Disc 6"

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Front Bumper Trim Panel/Running Board Split Rivet

Miniature Incandescent Bulb 12V 12CP

Halogen Miniature Bulb 65W 12V

Item#: P64203M01

H8 Halogen Miniature Bulb 35W 12V

Halogen Miniature Bulb 65W 12V

Item#: P64203M01

Butt Connector 16 to 14 AWG Blue

Miniature Incandescent Bulb 12V

Tire Repair Valve Green Plastic Cap

Tire Repair Tread Depth Gauge

Tire Repair Inner Liner Sealer

Tire Repair Valve Gray Plastic Cap with Seal

Item#: P85075M01

1/4" FPT Dual Foot Extension Air Chuck

Item#: DY90364490

TR# CH-1 Short Core Valve

Item#: DY90337252

Product Description

• Threaded inside and out for retaining valve core and exterior protective cap
• Locating ring provides secure seating and sealing
• Compression seal and valve base mount flush with rim contour and permit flexing without dislodging valve
• Resists temperature extremes and surge inflating
• Conforms to OEM and Tire and Rim Association specifications

Technical Specifications

Item#:	P40549
Type	Tubeless Tire Snap-in Valve
Category	Tire Repair
Group	Tire Valves
Size	1.5
Length	1-1/2 "
UNSPSC #:	25172502
TAA Compliant:	No
Weight:	0.58 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Engine Under Cover Drive Rivet Plastic 7mm Hole

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Apron Drive Rivet 8mm Hole

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Fender Bumper Shield Retainer 11/16"

Woven Polyester Electrical Tape 19mm x 25m

Inner Fender Shield Attaching Clip Nylon Black

Bumper Radiator and Grille Drive Rivet 7mm Hole

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Your Recently Viewed Items