Wedge Type Anchor Bolt, Steel, Zinc Finish, 5/8 x 4-1/2"
(Pack of
10)
SKU:92863 Item#: 92863
• Zinc-plated, rust-resistant steel
• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Frequently Bought Together
1/2x2-1/2 Mas-Tap Hd Anchor
$0.00
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-3/4"
$0.00
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 8 Steel M8-1.25
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/2 x 3-3/4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 3/8 x 2-1/4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/2 x 4-1/4"
$0.00
Couldn't load pickup availability
Product Description
• Zinc-plated, rust-resistant steel• Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. 1821, GSA FFS-325 and ASTM B633
• Designed for installation in concrete block, brick and stone
1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush.
2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture.
3. Tighten the nut three to five turns past the hand-tight position.
Technical Specifications
| Item#: | 92863 |
|---|---|
| Diameter | 5/8 " |
| Length | 4-1/2 " |
| Thread Length | 1-1/4 " |
| Drill Size | 5/8 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Size | 5/8X4-1/2 " |
| Minimum Embedment | 3 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 4.56 lb |
