Wedge Type Stud Bolt Anchor, Stainless Steel, Plain Finish, 5/8 x 4-1/4"
(Pack of
5)
SKU:91634 Item#: 91634
• Available in zinc-plated steel and stainless steel
1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-1/4"
$0.00
Couldn't load pickup availability
Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
$0.00
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 5/8"
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M12-1.75
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/2 x 4-1/4"
$0.00
Couldn't load pickup availability
Wedge Type Anchor Bolt Steel 3/8 x 2-3/4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 1/4 x 1-3/4"
$0.00
Couldn't load pickup availability
Product Description
• Available in zinc-plated steel and stainless steel1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Technical Specifications
| Item#: | 91634 |
|---|---|
| Diameter | 5/8 " |
| Length | 4-1/4 " |
| Thread Length | 2-3/8 " |
| Drill Size | 5/8 " |
| Material | Stainless Steel |
| Finish | Plain |
| Type | Wedge Anchor |
| Proof Test Load | 4,800 lb |
| Length Identification Code | F |
| Size | 5/8X4-1/4 " |
| Minimum Embedment | 2-5/8 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 2.0944 lb |
