X-Cut Exothermic Cutting Rod 10,000 Deg Operating Temperature 25/Box
(Pack of
1.0)
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.
• Cuts, gouges and pierces almost all materials — steel, steelreinforced concrete, stainless, composites and more!
• Burns through almost anything quickly — faster than a carbonarc or oxy-acetylene torch
• Economical — rods last longer and cut more material than other systems
Frequently Bought Together
Oxy-Therm Cutting Rod 3/8 x 24"
Couldn't load pickup availability
Oxy-Therm Cutting Rod 1/4 x 24"
Couldn't load pickup availability
3/8" Id Enternal Exothermic Rod Collet
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Cronatron Welding Guide
Couldn't load pickup availability
Heat Stick 400F Degrees
Couldn't load pickup availability
710 Stainless Steel Electrode 3/32"
Couldn't load pickup availability
TIG Welding Tungsten Electrode 2% Ceriated 3/32"
Couldn't load pickup availability
9V/HW20 TIG Welding Alumina Gas Cup #7
Couldn't load pickup availability
9V TIG Welding Long Torch Cap
Couldn't load pickup availability
Product Description
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.• Cuts, gouges and pierces almost all materials — steel, steelreinforced concrete, stainless, composites and more!
• Burns through almost anything quickly — faster than a carbonarc or oxy-acetylene torch
• Economical — rods last longer and cut more material than other systems
Technical Specifications
| Item#: | EG16501248 |
|---|---|
| Welding Process | Exothermic Electrode |
| Type | Cutting Rod |
| Diameter | 1/2 " |
| Length | 48 " |
| UNSPSC #: | 23271700 |
| TAA Compliant: | Yes |
| Weight: | 19.52 lb |
