1/4x3 Mas-Tap Hd Anchor
(Pack of
10)
One-piece heavy-duty anchor with sharp aggressive concrete cutting threads
Easy to install and can be removed
Serrated teeth under the head grip to installed fixtures
Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
Works with standard properly sized masonry drill bits, no special bit required
Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Frequently Bought Together

Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability

Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability

Drill 'N Drive Masonry Anchor Assortment 283Pcs
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M6-1 x 16mm
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm
Couldn't load pickup availability

Masonry Anchor Phillips Head #14-10 x 2-1/4"
Couldn't load pickup availability

Masonry Anchor Hex Washer Head Steel 1/4 x 1"
Couldn't load pickup availability

Masonry Anchor Star Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability

Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability

Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability

Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Product Description
One-piece heavy-duty anchor with sharp aggressive concrete cutting threads Easy to install and can be removed
Serrated teeth under the head grip to installed fixtures
Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
Works with standard properly sized masonry drill bits, no special bit required
Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Technical Specifications
Item#: | DY09991349 |
---|---|
Diameter | 1/4 " |
Length | 3 " |
Type | Screw Anchor |
Material | Carbon Steel |
Minimum Embedment | 1 " |
Finish | Zinc |
Drive | 7/16 " |
Drill Size | 1/4 " |
Head Style | Hex |
Drive Style | 7/16 " |
Minimum Hole Depth | 1-3/8 " |
UNSPSC #: | 31162104 |
TAA Compliant: | No |
Weight: | 0.58 lb |
