Home Welding Welding Products Cutting Rod 12Ft Cable And Copper Strike Plate
Cutting Rod
DV_ZoomOriginal_I_EG79800027.jpg
DV_ZoomOriginal_P_WDPMP1025_QT2.jpg
DV_ZoomOriginal_P_WDPMP1025_QT1.jpg
DV_ZoomOriginal_I_EG79800027.jpg
DV_ZoomOriginal_P_WDPMP1025_QT2.jpg
DV_ZoomOriginal_P_WDPMP1025_QT1.jpg

12 Foot Of 6Ga 600 Volt Cable With 25 Amp Aligator Clamp And 1"X 3"X .250 Copper Strike Plate
(Pack of 1)

Item#: EG79800027

Kent Automotive

This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.

Read More
Check Availability

Frequently Bought Together

DV_ZoomOriginal_I_CW3618A.jpg

Oxy-Therm Cutting Rod 1/4 x 36"

Item#: CW3618A
DV_ZoomOriginal_I_CW3619A.jpg

Oxy-Therm Cutting Rod 3/8 x 24"

Item#: CW3619A
DV_ZoomOriginal_I_CW3617.jpg

Oxy-Therm Cutting Rod 1/4 x 24"

Item#: CW3617
DV_ZoomOriginal_I_P85438.jpg

Front Bumper Drive Rivet Plastic 7mm Hole

Item#: P85438
DV_ZoomOriginal_I_P15599.jpg

Front Bumper Push-Type Retainer Nylon 20mm

Item#: P15599
DV_ZoomOriginal_I_P62445.jpg

Fender Bumper Shield Retainer 11/16"

Item#: P62445
DV_ZoomOriginal_I_1693854.jpg

Connector DINSE 10-25 Male

Item#: 1693854
DV_ZoomOriginal_I_1693856.jpg

DINSE Adapter 50 Female to 25 Male

Item#: 1693856
DV_ZoomOriginal_I_1693855.jpg

Connector DINSE 10-25 Female

Item#: 1693855
DV_ZoomOriginal_I_CW2236.jpg

9V/HW20 TIG Welding Alumina Gas Lens Cup #6

Item#: CW2236
DV_ZoomOriginal_I_EG00044912.jpg

Copper Contact Tip

Item#: EG00044912
DV_ZoomOriginal_P_WDPMP1016.jpg

Green And Red Oxygen And Acetylene Cutting And Welding Hose

Item#: EG74010025

Product Description

This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.

Technical Specifications

Item#: EG79800027
Type Striker Plate
UNSPSC #: 23271700
TAA Compliant: Yes
Weight: 1.71 lb

Suggested Products

DV_ZoomOriginal_P_WDPMP1025.jpg

3/8"X 50Ft Green Oxygen Hose

Item#: EG79800040
DV_ZoomOriginal_P_WDPMP1027.jpg

X-Cut Exothermic Cutting Rod 10,000 Deg Operating Temperature 25/Box

Item#: EG16501248
DV_ZoomOriginal_I_CW3618A.jpg

Oxy-Therm Cutting Rod 1/4 x 36"

Item#: CW3618A
DV_ZoomOriginal_I_CW3619A.jpg

Oxy-Therm Cutting Rod 3/8 x 24"

Item#: CW3619A
DV_ZoomOriginal_I_CW3617.jpg

Oxy-Therm Cutting Rod 1/4 x 24"

Item#: CW3617
DV_ZoomOriginal_P_WDPMP1025.jpg

3/8"X 25Ft Green Oxygen Hose

Item#: EG79800035
DV_ZoomOriginal_I_EG79800025.jpg

10"X6"X1/4" Leather Sheild

Item#: EG79800025
DV_ZoomOriginal_P_WDPMP1027.jpg

X-Cut Exothermic Cutting Rod 10,000 Deg Operating Temperature 10/Box

Item#: EG16503836
DV_ZoomOriginal_I_CW3617A.jpg

Oxy-Therm Cutting Rod 1/4 x 24"

Item#: CW3617A
DV_ZoomOriginal_I_EG79800022.jpg

3/8" Id Enternal Exothermic Rod Collet

Item#: EG79800022
DV_ZoomOriginal_I_CW3620.jpg

Oxy-Therm Cutting Rod 3/8 x 36"

Item#: CW3620
DV_ZoomOriginal_P_WDPMP1027.jpg

X-Cut Exothermic Cutting Rod 10,000 Deg Operating Temperature 50/Box

Item#: EG16501418

Your Recently Viewed Items