194 Specifically For Manganese Steels Low Hydrogen Flux Torch Cuttable All Position Polarity Dcep Or Ac 90Rb 48Rc Unlimited Passes
(Pack of
5)
Designed specifically for use on manganese steels. Use on carbon or low alloy steels may cause underbead cracks.
• Low Hydrogen Coating – Superior crack resistance
• Torch Cuttable – No arc gouging necessary
• Work hardens for toughness
• All-position control
• Excellent for multipass buildups
• Tensile Strength: 127,000 PSI/875 MPa
• Hardness:
– As deposited: 90 Rb
– Work Hardened: 48 Rc
• Yield Strength: 65,000 PSI/447 MPa
• Elongation: 50%
• Impact Strength (Charpy): 65 ft.-lbs. @ 0°F/-18°C
• Machinability: Good (carbide tools recommended)
• Max Number of Passes: Unlimited
• Current: DCEP (DC+) or AC
Frequently Bought Together
7770 Hard Facing Buildup Stick Rod Electrode 1/8"
Couldn't load pickup availability
7109 Austenitic Hard Facing Welding Wire 0.045"
Couldn't load pickup availability
675 Hi Brade Fc High Abrasion Moderate Impact .045X33LB SELF-SHIELD
Couldn't load pickup availability
777 Austenitic Hard Facing Stick Electrode 1/8"
Couldn't load pickup availability
7109 Austenitic Hard Facing Welding Wire 0.045"
Couldn't load pickup availability
777 Austenitic Hard Facing Stick Electrode 5/32"
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
710 Stainless Steel Electrode 3/32"
Couldn't load pickup availability
Heat Stick 250F Degrees
Couldn't load pickup availability
Heat Stick 650F Degrees
Couldn't load pickup availability
Product Description
Designed specifically for use on manganese steels. Use on carbon or low alloy steels may cause underbead cracks.• Low Hydrogen Coating – Superior crack resistance
• Torch Cuttable – No arc gouging necessary
• Work hardens for toughness
• All-position control
• Excellent for multipass buildups
• Tensile Strength: 127,000 PSI/875 MPa
• Hardness:
– As deposited: 90 Rb
– Work Hardened: 48 Rc
• Yield Strength: 65,000 PSI/447 MPa
• Elongation: 50%
• Impact Strength (Charpy): 65 ft.-lbs. @ 0°F/-18°C
• Machinability: Good (carbide tools recommended)
• Max Number of Passes: Unlimited
• Current: DCEP (DC+) or AC
Technical Specifications
| Item#: | EG19420000 |
|---|---|
| Welding Process | Stick |
| Type | Electrode |
| Diameter | 3/16 " |
| Base Metal | Manganese Steel |
| Hardness | 48 HRC |
| Polarity | DCEP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | No |
| Weight: | 10.98 lb |
