7500 Martensitic Hard Facing MIG Welding Wire, Flux Cored, 55 to 60 HRC Hardness, 75Ar/25C02 Shielding Gas, DCRP Polarity, 0.045"
(Pack of
10)
SKU:CW5169 Item#: CW5169
Designed for moderate abrasion resistance and impact situations.
Superior Advantages
• Good for metal-to-metal wear
• Torch cuttable
• Heat-treatable
• Unlimited pass-over-pass applications
• Provides good impact resistance
High alloy martensitic flux-cored hardfacing wire for moderate abrasion and impact
Hardness: Rc 55-60
Polarity: DC Reverse
Gas: 75% Ar, 25% CO2 or 100% CO2
Typical Applications
• Dredger and shovel teeth
• Hammers
• Conveyor screws
• Shredders
• Shear blades
• Torch cuttable alloy for buildup
• Exceptional impact and abrasive wear resistance
Technical TipNot recommended for austenitic manganese steel without a buffer layer of 7770M-FC.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
176 Extreme Abrasion With Impact 1/4X18IN
$0.00
Couldn't load pickup availability
172 Latch Bar And Dutchman Hardfacing Alloy 1/8X18
$0.00
Couldn't load pickup availability
7770 Hard Facing Buildup Stick Rod Electrode 3/16"
$0.00
Couldn't load pickup availability
281 Martensitic Hard Facing Welding Wire 0.045"
$0.00
Couldn't load pickup availability
7500 Martensitic MIG Welding Wire 0.035"
$0.00
Couldn't load pickup availability
750 Martensitic Hard Facing Stick Electrode 3/16"
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
$0.00
Couldn't load pickup availability
Connector DINSE 10-25 Female
$0.00
Couldn't load pickup availability
Electrode Holder 200A /w 10' Cable
$0.00
Couldn't load pickup availability
Flow Meter
$0.00
Couldn't load pickup availability
Product Description
Designed for moderate abrasion resistance and impact situations.Superior Advantages
• Good for metal-to-metal wear
• Torch cuttable
• Heat-treatable
• Unlimited pass-over-pass applications
• Provides good impact resistance
High alloy martensitic flux-cored hardfacing wire for moderate abrasion and impact
Hardness: Rc 55-60
Polarity: DC Reverse
Gas: 75% Ar, 25% CO2 or 100% CO2
Typical Applications
• Dredger and shovel teeth
• Hammers
• Conveyor screws
• Shredders
• Shear blades
• Torch cuttable alloy for buildup
• Exceptional impact and abrasive wear resistance
Technical TipNot recommended for austenitic manganese steel without a buffer layer of 7770M-FC.
Technical Specifications
| Item#: | CW5169 |
|---|---|
| Welding Process | MIG |
| Type | Flux Cored |
| Diameter | .045 " |
| Base Metal | Martensitic |
| Hardness | 55-60 HRC |
| Shielding Gas | 75Ar/25C02 |
| Polarity | DCRP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 11.4 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
