3/4x5 Mas-Tap HD Hex Head Concrete Screw Anchor
(Pack of
5)
SKU:DY09993357 Item#: DY09993357
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads
• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-3/4"
$0.00
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
$0.00
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 5/16 x 1-3/4"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
$0.00
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 5/16"
$0.00
Couldn't load pickup availability
Hex Cap Screw Property Class 8.8 M6-1 x 16mm
$0.00
Couldn't load pickup availability
3/16X1-1/4 Chrome Ez-One Square Pan Hd
$0.00
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 3/16 x 2-3/4"
$0.00
Couldn't load pickup availability
Masonry Anchor TORX® Flat Head Steel 1/4 x 3-3/4"
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Fender Lining Screw Grommet Nylon #12
$0.00
Couldn't load pickup availability
Product Description
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Technical Specifications
| Item#: | DY09993357 |
|---|---|
| Diameter | 3/4 " |
| Length | 5 " |
| Type | Screw Anchor |
| Material | Carbon Steel |
| Minimum Embedment | 2-1/2 " |
| Finish | Zinc |
| Drive | 1-1/8 " |
| Drill Size | 3/4 " |
| Head Style | Hex |
| Drive Style | 1-1/8 " |
| Quantity Per Package | 5.0000 |
| Minimum Hole Depth | 2-7/8 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 4.14 lb |
