Drop-In Anchor Steel 1/2 x 2"
(Pack of
10.0)
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
Drop-In Anchor High Strength 3/8-16 x 2-3/4"
Couldn't load pickup availability
Drop-In Anchor Steel 1/4 x 1"
Couldn't load pickup availability
Drop-In Anchor High Strength 1/4-20 x 1-1/2"
Couldn't load pickup availability
Diamond Grip II Threaded Insert Assortment
Couldn't load pickup availability
Hex Washer Head Self-Drilling Screw Assortment
Couldn't load pickup availability
Bumper Fascia Flares/Air Dam Push-Type Retainer
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | 96954 |
|---|---|
| Diameter | 1/2 " |
| Overall Length | 2 " |
| Type | Expansion Drop-In Anchor |
| Drill Size | 5/8 " |
| Allowable Tension (4,000 psi Concrete) | 1,243 lb |
| Allowable Shear (4,000 psi Concrete) | 1,603 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.08 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
