5/8x3 Mas-Tap HD Hex Head Concrete Screw Anchor
(Pack of
5)
SKU:DY09993149 Item#: DY09993149
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads
• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability
Hex Nut Grade 8 Steel 3/8-16
Couldn't load pickup availability
Acorn Nut A2 Stainless Steel M6-1
Couldn't load pickup availability
5/8x5 Mas-Tap Hd Anchor
Couldn't load pickup availability
Large Diameter Tapcon® Anchor 1/2 x 3"
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
Couldn't load pickup availability
Product Description
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Technical Specifications
| Item#: | DY09993149 |
|---|---|
| Diameter | 5/8 " |
| Length | 3 " |
| Type | Screw Anchor |
| Material | Carbon Steel |
| Minimum Embedment | 2-1/2 " |
| Finish | Zinc |
| Drive | 15/16 " |
| Drill Size | 5/8 " |
| Head Style | Hex |
| Drive Style | 15/16 " |
| Minimum Hole Depth | 2-7/8 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 1.75 lb |
