606 Duraweld M Mig Wire Maintenance Grade Mild Steel Solid Mig Wire
(Pack of
10.0)
A solid mild steel wire designed for welding steel in the short-circuit or spray mode. Dura-Weld M is a triple deoxidized wire for use on mill scale and light rust.
• Perfect for sheet metal, structural shapes and thin plate
• Highly deoxidized for high quality welds
• Designed for all grades of low to medium carbon steel
• Controlled temper for consistent feed characteristics
• Copper-coated for good electrical contact and to reduce oxidation
• Tensile Strength: 78,000 PSI/537 Mpa
• Yield Strength: 63,000 PSI/415 Mpa
• Elongation: 30%
• Impact Strength (Charpy) 0°F/-17°C: 70 ft.-lbs.
• Current: DCEP
• Gas: 75% Ar/25% CO2 or 100% CO2
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
331 Mild and Carbon Steel MIG Welding Wire 0.03"
Couldn't load pickup availability
321 Mild and Carbon Steel MIG Welding Wire 0.03"
Couldn't load pickup availability
E7024Mild /Carbon Steel Stick Electrode 3/16"
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Heat Stick 850F Degrees
Couldn't load pickup availability
Cap Whip-Lead Connector #4 to #1
Couldn't load pickup availability
Oxygen Safety Cap Heavy Duty
Couldn't load pickup availability
20862 Plasma Cutting Electrode
Couldn't load pickup availability
8-7504 Plasma Cutting Tip
Couldn't load pickup availability
20463 Plasma Cutting Swirl Baffle
Couldn't load pickup availability
Product Description
A solid mild steel wire designed for welding steel in the short-circuit or spray mode. Dura-Weld M is a triple deoxidized wire for use on mill scale and light rust.• Perfect for sheet metal, structural shapes and thin plate
• Highly deoxidized for high quality welds
• Designed for all grades of low to medium carbon steel
• Controlled temper for consistent feed characteristics
• Copper-coated for good electrical contact and to reduce oxidation
• Tensile Strength: 78,000 PSI/537 Mpa
• Yield Strength: 63,000 PSI/415 Mpa
• Elongation: 30%
• Impact Strength (Charpy) 0°F/-17°C: 70 ft.-lbs.
• Current: DCEP
• Gas: 75% Ar/25% CO2 or 100% CO2
Technical Specifications
| Item#: | EG60640035 |
|---|---|
| Welding Process | MIG |
| Type | MIG |
| Diameter | .035 " |
| Tensile Strength | 78,000 PSI |
| Yield Strength | 63,000 PSI |
| Base Metal | Mild & Carbon Steel |
| Shielding Gas | 75% Ar/25% CO2 or 100% CO2 |
| Polarity | DCEP |
| Size | .035 " |
| UNSPSC #: | 23271810 |
| TAA Compliant: | No |
| Weight: | 11.04 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
