625 Copper and Brass Stick Rod Electrode, Flux Coated, 50 to 75 Amps, DCRP Polarity, Easy Arc Control, 3/32"
(Pack of 5)

SKU:CW1859 Item#: CW1859

Cronatron®

Welds most ferrous and non-ferrous metals and joins most combinations of dissimilar metals (except white metals).
Superior Advantages
• Tough, crack-free, machinable welds
• Easy arc control with little preheat
• High frictional wear resistance
• High strength
Tensile Strength: 110,000 PSI
Hardness: Rc 21-23
Polarity: DC Reverse
Typical Applications
• Brass, bronze or cast iron to steel
• Gear teeth, valves and castings
• Impellers, cams and shafts
Usage ProcedureUse DC reverse polarity. Clean surfaces of grease, rust or scale. Use short arc with weave or stringer bead. No preheating required, except on heavy sections: 500°F (260°C) steel; 900°F (482°C) copper. For TIG use direct current straight polarity (electrode–). Clean surfaces of grease, rust, scale, etc. Use pure argon gas or a mixture of argon/helium for heavy sections. Set the flow rate at 15 to 20 CFH. For best results, use a gas lens collet body. Amperage will depend on ba

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

625 Copper and Brass TIG Wire 1/16"

625 Copper and Brass TIG Wire 3/32"

157T Premium Bronze Solid Tig Wire 1/8X36

Item#: EG2004157T

Front Bumper Push-Type Retainer Nylon 20mm

Front Bumper and Radiator Support Drive Rivet

Fender Bumper Shield Retainer 11/16"

Ground Clamp 200A /w 10' Cable

Connector DINSE 10-25 Male

DINSE Adapter 50 Female to 25 Male

8-7502 Plasma Cutting Electrode

192047 Plasma Cutting Electrode

8-7500 Plasma Cutting Shield Cup

Product Description

Welds most ferrous and non-ferrous metals and joins most combinations of dissimilar metals (except white metals).
Superior Advantages
• Tough, crack-free, machinable welds
• Easy arc control with little preheat
• High frictional wear resistance
• High strength
Tensile Strength: 110,000 PSI
Hardness: Rc 21-23
Polarity: DC Reverse
Typical Applications
• Brass, bronze or cast iron to steel
• Gear teeth, valves and castings
• Impellers, cams and shafts
Usage ProcedureUse DC reverse polarity. Clean surfaces of grease, rust or scale. Use short arc with weave or stringer bead. No preheating required, except on heavy sections: 500°F (260°C) steel; 900°F (482°C) copper. For TIG use direct current straight polarity (electrode–). Clean surfaces of grease, rust, scale, etc. Use pure argon gas or a mixture of argon/helium for heavy sections. Set the flow rate at 15 to 20 CFH. For best results, use a gas lens collet body. Amperage will depend on ba

Technical Specifications

Item#:	CW1859
Welding Process	Stick
Type	Flux Coated
Diameter	3/32 "
Tensile Strength	110,000 PSI
Base Metal	Copper/Brass
Hardness	21-23 HRC
Polarity	DCRP
UNSPSC #:	23271810
TAA Compliant:	Yes
Weight:	5.2 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

667 Copper and Brass Stick Rod Electrode 1/8"

157 Bronze Stick Electrode 1/8

Item#: EG15741000

657 Premium Bronze Solid Mig Wire .035X30LB SPL

Item#: EG65770035

665 Copper and Brass TIG Wire 1/8"

157 Bronze Stick Electrode 3/32

Item#: EG15751000

157T Premium Bronze Solid Tig Wire 3/32X36

Item#: EG2005157T

625 Copper and Brass Stick Rod Electrode 1/8"

665 Copper and Brass TIG Wire 3/32"

625 Copper and Brass MIG Welding Wire 0.045"

625 Copper and Brass TIG Wire 1/16"

625 Copper and Brass TIG Wire 3/32"

157T Premium Bronze Solid Tig Wire 1/8X36

Item#: EG2004157T

Your Recently Viewed Items