670 Fc Build Up Flux Core For Carbon And Low Alloy Steels 1/16X33LB
(Pack of
33.0)
An easy-to-use alloy for building up and joining of carbon and low alloy steels in either flat or horizontal positions. Offers excellent tie-ins with all of the Wear-X Alloys. Has excellent resistance to cracking under heavy loads. It is highly recommended for use on shovels, buckets, blades, augers, track pads, ring gears, housings, conveyor parts, and agricultural, bick making, dredging, foundry and trenching equipment.
• No Gas Required – Greater portability
• Low Spatter – Less clean-up
• Excellent Arc Stability – Better deposit control
• Shock-Resistant – Fights impact
• High Compression Strength – For a strong base foundation
• Compressive Strength: 145,000 PSI/1,000 Mpa
• Hardness: 28 Rc (2 passes .2% C steel)
• Elongation: 18%
• Machinability: Good (carbide tools)
• Max Number of Passes: Unlimited
• Current: DCEP
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
170 Build Up Of Carbon And Low Alloy Steels 5/32
Couldn't load pickup availability
7770 Hard Facing Buildup Stick Rod Electrode 1/4"
Couldn't load pickup availability
MP Hard Facing Buildup MIG Welding Wire 0.045"
Couldn't load pickup availability
172 Latch Bar And Dutchman Hardfacing Alloy 1/8X18
Couldn't load pickup availability
7770 Hard Facing Buildup Stick Rod Electrode 3/16"
Couldn't load pickup availability
178 Ultimate Abrasion Resistance 3/8X18IN
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Light Weight Composite Wear Plates 36X4X13/64
Couldn't load pickup availability
Acetylene Safety Cap Heavy Duty
Couldn't load pickup availability
Round Soapstone Holder Heavy Duty
Couldn't load pickup availability
Product Description
An easy-to-use alloy for building up and joining of carbon and low alloy steels in either flat or horizontal positions. Offers excellent tie-ins with all of the Wear-X Alloys. Has excellent resistance to cracking under heavy loads. It is highly recommended for use on shovels, buckets, blades, augers, track pads, ring gears, housings, conveyor parts, and agricultural, bick making, dredging, foundry and trenching equipment.• No Gas Required – Greater portability
• Low Spatter – Less clean-up
• Excellent Arc Stability – Better deposit control
• Shock-Resistant – Fights impact
• High Compression Strength – For a strong base foundation
• Compressive Strength: 145,000 PSI/1,000 Mpa
• Hardness: 28 Rc (2 passes .2% C steel)
• Elongation: 18%
• Machinability: Good (carbide tools)
• Max Number of Passes: Unlimited
• Current: DCEP
Technical Specifications
| Item#: | EG67080062 |
|---|---|
| Welding Process | Flux-Core Arc Welding |
| Type | Flux-Cored Wire |
| Diameter | 1/16 " |
| Base Metal | Mild And Medium Carbon Steel |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 37.75 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
