Air Hose Ferrule Brass 5/8"
(Pack of
10)
Best for use with low-pressure air hose and brass barb fittings. Note: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made. Do not exceed pressure limit of hose or air-operated devices being used.
• Made in USA
• 300 PSI maximum air pressure
• 1" long
NOTE: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made up. Do not exceed pressure limit of hose or air-operated devices being used.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 10-36
Frequently Bought Together
Hose Barb Brass 3/4" x 3/4-14
Couldn't load pickup availability
Hose Barb Hose Mender Brass 3/4 x 3/4"
Couldn't load pickup availability
Hose Barb Brass 3/8" x 3/8-18
Couldn't load pickup availability
Hose Barb Brass 3/16" x 1/8-27
Couldn't load pickup availability
Hose Barb Brass 1/8" x 1/8-27
Couldn't load pickup availability
Air Hose Ferrule Brass 11/16"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Vacuum Hose Connector 1/8 x 1/8"
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/8"
Couldn't load pickup availability
Barb-Lok Hose End 1/4" (-4) x 9/16-18 (-6)
Couldn't load pickup availability
Barb-Tite™ Instrumentation Elbow 5/16 x 1/8"
Couldn't load pickup availability
Barb-Lok Hose End 1/4" (-4) x 7/16-20 (-4)
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Product Description
Best for use with low-pressure air hose and brass barb fittings. Note: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made. Do not exceed pressure limit of hose or air-operated devices being used.• Made in USA
• 300 PSI maximum air pressure
• 1" long
NOTE: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made up. Do not exceed pressure limit of hose or air-operated devices being used.
Technical Specifications
| Item#: | 61775 |
|---|---|
| Type | Air Hose |
| Material | Brass |
| Length | 1 " |
| Ferrule Inside Diameter | .625 " |
| Fits Hose O.D. | 5/8 " |
| UNSPSC #: | 27131600 |
| TAA Compliant: | Yes |
| Weight: | 0.15 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
