Air Hose Ferrule Brass 21/32"
(Pack of
10.0)
Best for use with low-pressure air hose and brass barb fittings. Note: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made. Do not exceed pressure limit of hose or air-operated devices being used.
• Made in USA
• 300 PSI maximum air pressure
• 1" long
NOTE: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made up. Do not exceed pressure limit of hose or air-operated devices being used.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 10-36
Frequently Bought Together
Hose Barb Brass 3/8" x 1/4-18
Couldn't load pickup availability
Hose End Reusable Brass 1/4 x 1/4-18
Couldn't load pickup availability
Hose Barb Steel 1-11-1/2 x 1"
Couldn't load pickup availability
Iron Interlocking Hose Insert 2" x 2-11-1/2
Couldn't load pickup availability
Hose Barb Elbow 45° Brass 3/8" x 1/4-18
Couldn't load pickup availability
GM23
Couldn't load pickup availability
Fuel Line Hose 3/16" ID x 25'
Couldn't load pickup availability
Hose Connector Vacuum Line Cap 3/8" ID
Couldn't load pickup availability
SAE R16S Hydraulic Hose Rubber 0.81" x 50'
Couldn't load pickup availability
Barb-Lok Hose End 3/4" (-12) x 1/2-14 (-8)
Couldn't load pickup availability
Barb-Lok Hose End 1/4" (-4) x 1/4-18 (-4)
Couldn't load pickup availability
Barb-Titeâ„¢ Straight Hose End Rigid 5/16"
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
Best for use with low-pressure air hose and brass barb fittings. Note: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made. Do not exceed pressure limit of hose or air-operated devices being used.• Made in USA
• 300 PSI maximum air pressure
• 1" long
NOTE: Because hose tolerances vary, it is necessary to fit ferrules and fittings to each individual hose being made up. Do not exceed pressure limit of hose or air-operated devices being used.
Technical Specifications
| Item#: | 61776 |
|---|---|
| Type | Air Hose |
| Material | Brass |
| Length | 1 " |
| Ferrule Inside Diameter | .656 " |
| Fits Hose O.D. | 21/32 " |
| UNSPSC #: | 27131600 |
| TAA Compliant: | Yes |
| Weight: | 0.36 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
