ALLIGATOR® Anchor Nylon #6 to 5/16"
(Pack of
25.0)
Flangeless Anchor
Anti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Masonry Anchor Phillips Head #14-10 x 2-3/4"
Couldn't load pickup availability
Drop-In Anchor Steel 1/2 x 2"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 5/16 x 1-3/4"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 45mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 50mm
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Tubular Anchor Plastic Orange #16 to #18
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 2"
Couldn't load pickup availability
Tubular Anchor Plastic Orange #16 to #18
Couldn't load pickup availability
Product Description
Flangeless AnchorAnti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Technical Specifications
| Item#: | 62631 |
|---|---|
| Length | 1 3/4 " |
| Type | Alligator |
| Size | 5/16 " |
| Diameter | 5/16 " |
| Material | Nylon |
| Screw Diameter | No. 6 - 5/16" " |
| Drill Size | 5/16 " |
| Anchor Size | 5/16 " |
| Tensile Pull-Out Strength | 3,083 lb |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
