Band-It Clamp, Galvanized High-Carbon Steel, 4-1/2" ID, 5/8" Width, 1/32" Thickness
(Pack of
10)
Made of high-carbon electrolytic galvanized steel to resist corrosion 1/32" thick band
Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together

Constant Torque Hose Clamp SS 1 to 1-3/4"
Couldn't load pickup availability

One-Ear Stepless Hose Clamp 304 SS 0.209 to 0.256"
Couldn't load pickup availability

Non-Perforated Clamp 316 SS #104 5-1/2 to 7"
Couldn't load pickup availability

Air Conditioning Slim Line Sealing Washer
Couldn't load pickup availability

Silicone Coolant/Heater Hose Clamp 7/16 to 25/32"
Couldn't load pickup availability

Hose Connector Vacuum Line Cap 3/8" ID
Couldn't load pickup availability

Super 77 Miniature Hose Clamp SS 7/32 to 5/8"
Couldn't load pickup availability

H353H Truck Hose 1-5/64" OD x 50'
Couldn't load pickup availability

Non-Perforated Clamp 316 SS #28 1-1/4 to 2-1/4"
Couldn't load pickup availability

Hose Clamp 301 SS 11/16 to 1-1/2"
Couldn't load pickup availability

Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability

Universal Vacuum Hose Connector 3/16"
Couldn't load pickup availability

Bumper Cover Push-Type Retainer Nylon 18mm
Couldn't load pickup availability

Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability

Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Product Description
Made of high-carbon electrolytic galvanized steel to resist corrosion 1/32" thick band Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Technical Specifications
Item#: | 81802 |
---|---|
Category | Band-It Clamp |
Applications | Industrial Hose Assemblies and General Applications |
Material | Galvanized High-Carbon Steel |
Size | 4-1/2 " |
I.D. | 4-1/2 " |
Minimum Diameter | 4-1/2 " |
Band Width | 5/8 " |
Width | 5/8 " |
Thickness | 1/32 " |
UNSPSC #: | 31162906 |
TAA Compliant: | Yes |
Weight: | 1.9 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov





