Chucking Reamer Cobalt 0.3745"
(Pack of
1.0)
These high-quality reamers are designed for most standard needs.
Dowel pin reamers are made to a minus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chucking Reamer HSS 15mm
Couldn't load pickup availability
Chucking Reamer HSS 18mm
Couldn't load pickup availability
Chucking Reamer HSS 1/2"
Couldn't load pickup availability
Steel Crimped Cup Brush 1-3/4"
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Aligning Reamer HSS 15/16"
Couldn't load pickup availability
Step Reamer Set
Couldn't load pickup availability
Cryocut Shoulder Bolt Truck Frame Reamer 0.461" x 0.776" Diameter
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability
Blade Disposal Container
Couldn't load pickup availability
Razor Blade, Single Edge, High Carbon Steel
Couldn't load pickup availability
Product Description
These high-quality reamers are designed for most standard needs.Dowel pin reamers are made to a minus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1291791 |
|---|---|
| Reamer Type | Dowel Pin |
| Type | Chucking |
| Material | Cobalt |
| Diameter | 0.3745 " |
| Decimal Equivalent | .3745 " |
| Shank Type | Straight |
| Shank Size | .3105 " |
| Flute Type | Straight |
| Flute Length | 1-3/4 |
| Overall Length | 7 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
