Chucking Reamer Cobalt 3/4"
(Pack of
1.0)
These high-quality reamers are designed for most standard needs.
Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chucking Reamer HSS 7/8"
Couldn't load pickup availability
Chucking Reamer HSS 10mm
Couldn't load pickup availability
Chucking Reamer HSS 0.376"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Cryocut 7/8" 5-Flute Reamer, 1/2" Shank
Couldn't load pickup availability
Cryomagna Cut 9/16" Dia Safety Reamer
Couldn't load pickup availability
Aligning Reamer HSS 9/16"
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
11Pc Lock and Load Hammer Set
Couldn't load pickup availability
Product Description
These high-quality reamers are designed for most standard needs.Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1290325 |
|---|---|
| Reamer Type | Fractional |
| Type | Chucking |
| Material | Cobalt |
| Diameter | 3/4 " |
| Decimal Equivalent | .7500 " |
| Shank Type | Straight |
| Shank Size | .6245 " |
| Flute Type | Straight |
| Flute Length | 2-1/2 |
| Overall Length | 9-1/2 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
