Chucking Reamer, Cobalt, Straight Shank, Straight Flute, 0.5415" Diameter
(Pack of
1)
SKU:1290235 Item#: 1290235
These high-quality reamers are designed for most standard needs.
Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chucking Reamer HSS 3/4"
Couldn't load pickup availability
Chucking Reamer HSS 6mm
Couldn't load pickup availability
Chucking Reamer HSS 5/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability
Taper Pin Reamer HSS 7"
Couldn't load pickup availability
Step Reamer
Couldn't load pickup availability
Aligning Reamer HSS 1/2"
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Master Security Bit Set 203Pc
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Product Description
These high-quality reamers are designed for most standard needs.Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1290235 |
|---|---|
| Reamer Type | Intermediate Size |
| Type | Chucking |
| Material | Cobalt |
| Diameter | 0.5415 " |
| Decimal Equivalent | .5415 " |
| Shank Type | Straight |
| Flute Type | Straight |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
