Drop-In Anchor Steel 3/8 x 1-9/16"
(Pack of
25.0)
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Assortment 283Pcs
Couldn't load pickup availability
5/8 Drop In Anchor
Couldn't load pickup availability
3/4 Drop In Anchor
Couldn't load pickup availability
Drop-In Anchor High Strength 1/2-13 x 3-5/8"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 25mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 12mm
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | 96953 |
|---|---|
| Diameter | 3/8 " |
| Overall Length | 1-9/16 " |
| Type | Expansion Drop-In Anchor |
| Drill Size | 1/2 " |
| Allowable Tension (4,000 psi Concrete) | 973 lb |
| Allowable Shear (4,000 psi Concrete) | 1,148 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.47 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
