Drywall Abrasive Paper, Silicon Carbide Grain, Fits Standard Pole and Hand Sanders, 120 Grit, 4-3/16" Width, 11" Length
(Pack of
10)
SKU:63281 Item#: 63281
Made with silicon carbide grain, a sharp synthetic mineral that cuts fast
Drywall screen is waterproof; open mesh design resists loading rinse and reuse
Ideal for sanding drywall compound and patching plaster prior to priming
Specially shaped to fit standard pole and hand sanders when wrapped over the end and clamped in place
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together
Non-PSA Sandpaper Sheet 11"
Couldn't load pickup availability
Wet/Dry Sandpaper 9 x 11"
Couldn't load pickup availability
Non-PSA Sandpaper Sheet 9"
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Non-PSA Sandpaper Strip 17-1/2"
Couldn't load pickup availability
Non-PSA Sandpaper Sheet 11"
Couldn't load pickup availability
Wet/Dry Sandpaper 9 x 11"
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
0.5 HP Reciprocating Air Saw
Couldn't load pickup availability
Product Description
Made with silicon carbide grain, a sharp synthetic mineral that cuts fast Drywall screen is waterproof; open mesh design resists loading rinse and reuse
Ideal for sanding drywall compound and patching plaster prior to priming
Specially shaped to fit standard pole and hand sanders when wrapped over the end and clamped in place
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 63281 |
|---|---|
| Type | Drywall Screen |
| Length | 11 " |
| Width | 4-3/16 " |
| Grit | 120 |
| Grain | Silicon Carbide |
| UNSPSC #: | 31191501 |
| TAA Compliant: | Yes |
| Weight: | 0.43 lb |
