Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
(Pack of
1)
M80 for import size spot welds (8mm).
Drill point is self-centering, so pre-marking is not required
Three flats on shank prevent drill from spinning in drill chuck
Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 4-6
Frequently Bought Together

2" Grey Finger Disc - 120 Grit
Couldn't load pickup availability

Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 1/16"
Couldn't load pickup availability

Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability

Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability

Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

18" Locking Smooth Operator Clamp
Couldn't load pickup availability

Jobber Length Drill Bit HSS 6.5mm
Couldn't load pickup availability
Product Description
M80 for import size spot welds (8mm). Drill point is self-centering, so pre-marking is not required
Three flats on shank prevent drill from spinning in drill chuck
Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
Item#: | 54455 |
---|---|
Type | Spot Weld Drill Bit |
Style | Single-Ended |
Material | HSS |
Diameter | 5/16 " |
Decimal Equivalent | 0.3125 " |
Flute Type | Spiral |
Overall Length | 2-3/4 " |
Shank | Straight |
UNSPSC #: | 23241606 |
TAA Compliant: | Yes |
Weight: | 0.09 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

