Flap Band, Use on Die Grinder, Deburring, Grinding at 90° Angle, Zirconium Grain, 80 Grit, 1-1/4" Diameter, 3/4" Width
(Pack of
1)
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 3-19
Frequently Bought Together
Flexible Grinding Disc 7"
Couldn't load pickup availability
Bench Grinding Aluminum Oxide wheel 7" x 1" 60 Grit
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Eraser Disc Natural Tan 4 x 1"
Couldn't load pickup availability
Reciprocating Saw Blade 9" 14TPI
Couldn't load pickup availability
Mounted Flap Wheel 3"
Couldn't load pickup availability
Unmounted Flap Wheel 6"
Couldn't load pickup availability
Flap Band 3-1/2"
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs
Couldn't load pickup availability
Blade Disposal Container
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Product Description
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 28100 |
|---|---|
| Type | Flap Band |
| Diameter | 1-1/4 " |
| Width | 3/4 " |
| Grit | 80 |
| Maximum RPM | 26,000 |
| Grain | Zirconium |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | Yes |
| Weight: | 0.02 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
