Home Abrasive Wheels Flap Band 1-3/4"
Abrasive Wheels
DV_ZoomOriginal_I_28104.jpg
DV_ZoomOriginal_P_31420_AP1.jpg
DV_ZoomOriginal_P_31420_AP2.jpg
DV_ZoomOriginal_P_31420_AP3.jpg
DV_ZoomOriginal_I_28104.jpg
DV_ZoomOriginal_P_31420_AP1.jpg
DV_ZoomOriginal_P_31420_AP2.jpg
DV_ZoomOriginal_P_31420_AP3.jpg

Flap Band, Use on Die Grinder, Deburring, Grinding at 90° Angle, Zirconium Grain, 80 Grit, 1-3/4" Diameter, 1-3/16" Width
(Pack of 1)

Item#: 28103

Blue-Kote

Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Read More
Check Availability

Catalog page#: 3-19

Frequently Bought Together

DV_ZoomOriginal_I_1507062M10.jpg

Premium Ceramic Grinding Disk 4-1/2"

Item#: 1507062M10
DV_ZoomOriginal_P_CTPMP1054.jpg

Partsmaster Brand Grinding Disk 4-1/2" x 1/4" x 7/8"Arbor Aluminum O

Item#: PM08134550
DV_ZoomOriginal_I_29367M10.jpg

Premium Grinding Wheel 4-1/2"

Item#: 29367M10
DV_ZoomOriginal_I_KT15080.jpg

Spot Weld Remover Drill Bit 5/16" (M8)

Item#: KT15080
DV_ZoomOriginal_I_91975.jpg

Stemmed Knot-Type Wire Wheel 3"

Item#: 91975
DV_ZoomOriginal_P_CTPMP1140.jpg

Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI

Item#: DY80324224
DV_ZoomOriginal_P_CTPMP1055.jpg

1" Dia. X 1" Wide, Flap Wheel, 60 Grit, 1/4" Shank

Item#: PM08141060
DV_ZoomOriginal_I_92020M06.jpg

Mounted Flap Wheel 2"

Item#: 92020M06
DV_ZoomOriginal_P_CTPMP1055.jpg

3" Dia. x 1" Wide Flap Wheel 80 Grit, 1/4" Shank Dia.

Item#: PM08143080
DV_ZoomOriginal_I_KT14285.jpg

Front Bumper Drive Rivet Plastic 10mm Hole

Item#: KT14285
DV_ZoomOriginal_I_P15599.jpg

Front Bumper Push-Type Retainer Nylon 20mm

Item#: P15599
DV_ZoomOriginal_I_KT13537.jpg

Front Bumper and Radiator Support Drive Rivet

Item#: KT13537
DV_ZoomOriginal_I_P59549.jpg

Razor Blade Single Edge w/Notch

Item#: P59549
DV_ZoomOriginal_I_DY89310460.jpg

Spinning Handmaster Driver Set 5Pc Set

Item#: DY89310460
DV_ZoomOriginal_I_FA5737.jpg

Nutsetter & Bit Set, Magnetic, 22pc

Item#: FA5737

Product Description

Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Technical Specifications

Item#: 28103
Type Flap Band
Diameter 1-3/4 "
Width 1-3/16 "
Grit 80
Maximum RPM 19,100
Grain Zirconium
Aluminum Approved Yes
UNSPSC #: 31191507
TAA Compliant: Yes
Weight: 0.05 lb

Suggested Products

Your Recently Viewed Items