Home Abrasive Wheels Flap Band 2-1/2"
Abrasive Wheels
DV_ZoomOriginal_I_28098.jpg
DV_ZoomOriginal_P_31420_AP1.jpg
DV_ZoomOriginal_P_31420_AP2.jpg
DV_ZoomOriginal_P_31420_AP3.jpg
DV_ZoomOriginal_I_28098.jpg
DV_ZoomOriginal_P_31420_AP1.jpg
DV_ZoomOriginal_P_31420_AP2.jpg
DV_ZoomOriginal_P_31420_AP3.jpg

Flap Band, Use on Die Grinder, Deburring, Grinding at 90° Angle, Zirconium Grain, 60 Grit, 2-1/2" Diameter, 1-3/16" Width
(Pack of 1)

Item#: 28105

Blue-Kote

Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Read More
Check Availability

Catalog page#: 3-19

Frequently Bought Together

DV_ZoomOriginal_I_63127.jpg

Unitized Mounted Point 1/2"

Item#: 63126
DV_ZoomOriginal_P_CTPMP1066.jpg

Unloader Aluminum Grinding Wheel 7" x 1/4" x 5/8-11" Arbor Bulk

Item#: DY87707051
DV_ZoomOriginal_I_63127.jpg

Unitized Mounted Point 1/2"

Item#: 63127
DV_ZoomOriginal_I_1447376.jpg

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Item#: 1447376
DV_ZoomOriginal_I_KT13516.jpg

Spot Weld Remover Drill Bit Cobalt 3/8" (M10)

Item#: KT13516
DV_ZoomOriginal_P_31404.jpg

Steel Crimped End Brush 1/2"

Item#: 95137
DV_ZoomOriginal_P_9096.jpg

Mounted Mini Flap Wheel 3/4"

Item#: 64685
DV_ZoomOriginal_P_CTPMP1017.jpg

3" Dia. X 1" Wide, Flap Wheel, 60 Grit, 1/4" Shank

Item#: DY87930060
DV_ZoomOriginal_P_CTPMP1017.jpg

3" Dia. X 1" Wide, Flap Wheel, 80 Grit, 1/4" Shank

Item#: DY87930080
DV_ZoomOriginal_I_P58130.jpg

Hex Head Sheet Metal Screw with 16mm Washer Steel

Item#: P58130
DV_ZoomOriginal_I_P85438.jpg

Front Bumper Drive Rivet Plastic 7mm Hole

Item#: P85438
DV_ZoomOriginal_I_1420584.jpg

Front Bumper Specialty Nut Steel M4.2-1.41

Item#: 1420584
DV_ZoomOriginal_I_KT12707.jpg

Abrasive Bristle Wire Belt Steel 23mm

Item#: KT12707
DV_ZoomOriginal_I_56537.jpg

Scotch-Brite Roloc Bristle Disc 2"

Item#: 56537
DV_ZoomOriginal_I_DY89310520.jpg

Interchangeable Hex Bit Set 24Pc SAE

Item#: DY89310520

Product Description

Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Technical Specifications

Item#: 28105
Type Flap Band
Diameter 2-1/2 "
Width 1-3/16 "
Grit 60
Maximum RPM 12,700
Grain Zirconium
Aluminum Approved Yes
UNSPSC #: 31191507
TAA Compliant: Yes
Weight: 0.08 lb

Suggested Products

Your Recently Viewed Items