Fuel Line Hose 3/8" ID x 25'
(Pack of
1)
Eliminate the need for costly, hard-to-install metal tubing with this fuel line hose. Resistant to cold, ozone and fluids, this product is constructed of a nitrile tube, two-braid rayon cord reinforcement and Hypalon cover. Keep fuel running smoothly throughout your fleet of vehicles with this dependable hose. Approved for use with leaded and unleaded gasoline, ethanol and methanol-based gasohol and diesel fuel. Should not be used on fuel injection applications.
Packaged in 25-foot rolls
Manufactured to meet or exceed SAE J30R7 and similar to GM 6165M specifications
Resists heat up to 257°F (125°C)
50 PSI working pressure; 250 PSI burst pressure
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 7-9
Frequently Bought Together

Fuel Line Hose 1/4" ID x 25'
Couldn't load pickup availability

Silicone Heater and Radiator Hose 3" OD
Couldn't load pickup availability

Fuel Line Hose 5/16" ID x 25'
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 1-5/16 to 2-1/4"
Couldn't load pickup availability

Slotted Hex Head Hose Clamp 301 SS 3/8 to 7/8"
Couldn't load pickup availability

Vacuum Hose Connector Straight 1/4 x 1/4"
Couldn't load pickup availability

H23906-250R
Couldn't load pickup availability

H213 Truck Hose 47/64" OD x 50'
Couldn't load pickup availability

H353H Truck Hose 1-3/4" OD x 50'
Couldn't load pickup availability

Vacuum Hose Connector 1/8 x 1/8"
Couldn't load pickup availability

DOT Compression Elbow Male 90° Brass 3/8 x 1/8"
Couldn't load pickup availability

Hose Clamp 301 SS 11/16 to 1-1/2"
Couldn't load pickup availability

Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability

Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Product Description
Eliminate the need for costly, hard-to-install metal tubing with this fuel line hose. Resistant to cold, ozone and fluids, this product is constructed of a nitrile tube, two-braid rayon cord reinforcement and Hypalon cover. Keep fuel running smoothly throughout your fleet of vehicles with this dependable hose. Approved for use with leaded and unleaded gasoline, ethanol and methanol-based gasohol and diesel fuel. Should not be used on fuel injection applications. Packaged in 25-foot rolls
Manufactured to meet or exceed SAE J30R7 and similar to GM 6165M specifications
Resists heat up to 257°F (125°C)
50 PSI working pressure; 250 PSI burst pressure
Technical Specifications
Item#: | 6637 |
---|---|
Type | Fuel Line Hose |
I.D. | 3/8 " |
Hose O.D. | 5/8 " |
Hose Cover Material | Hypalon |
Hose Reinforcement | 2 Braid Rayon |
Inner Tube Material | Nitrile |
Temperature | 275 F Maximum |
Category/Performance | Best Quality |
Industry Rating 1 | SAE J30R6, SAE J30R7 |
UNSPSC #: | 25170000 |
TAA Compliant: | Yes |
Weight: | 3.46 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
