Hex Cap Screw, Grade 8, Alloy Steel, Zinc Finish, Fine Thread, 21/32" Head Height, 1-5/16" Across Flats, 7/8-14 x 1-1/2"
(Pack of
10)
SKU:928 Item#: 928
• Most versatile, best value for standard maintenance operations
• High-strength matched component fastening system
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 150,000 PSI tensile strength
• Manufactured to meet or exceed Grade 8 strength requirements
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 11-9
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M8-1.25 x 12mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 45mm
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M10-1.5 x 50mm
$0.00
Couldn't load pickup availability
Hex Cap Screw Grade 8 5/16-18 x 1-1/4"
$0.00
Couldn't load pickup availability
Hex Cap Screw Grade 5 5/16-18 x 1"
$0.00
Couldn't load pickup availability
Hex Cap Screw Grade 8 3/8-16 x 6-1/2"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #14 x 3/4"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1-1/4"
$0.00
Couldn't load pickup availability
DIN 9021B Fender Washer Low Carbon Steel 18mm
$0.00
Couldn't load pickup availability
Adhesive-Back Shim Stock 5/16 x 1" x 30'
$0.00
Couldn't load pickup availability
Adhesive-Back Shim Stock 9/16 x 1" x 30'
$0.00
Couldn't load pickup availability
Swirl Remover 16oz
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 8 Steel M10-1.5
$0.00
Couldn't load pickup availability
Hex Nut Grade 2 Steel 1/4-20
$0.00
Couldn't load pickup availability
Hex Nut Grade 10 Alloy Steel M6-1
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Product Description
• Most versatile, best value for standard maintenance operations• High-strength matched component fastening system
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 150,000 PSI tensile strength
• Manufactured to meet or exceed Grade 8 strength requirements
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2
Technical Specifications
| Item#: | 928 |
|---|---|
| Style | Premium |
| Diameter | 7/8 " |
| Thread Pitch | 14 |
| Thread | Fine |
| Length | 1-1/2 " |
| Type | Hex Cap Screw |
| Across Flats | 1-5/16 " |
| Material | Alloy Steel |
| Grade | 8 |
| Finish | Bright Zinc |
| Tensile Strength | 150,000 PSI |
| Head Style | High Hex |
| Head Height | 21/32 " |
| Thread Form | UNJ |
| Thread Length | Full |
| Thread Length Minimum | Full |
| UNSPSC #: | 31161501 |
| TAA Compliant: | Yes |
| Weight: | 4.86 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
