Home Fasteners Bolts Cap Screws Hex Cap Screw Grade 9 Alloy Steel 5/8-11 x 7-1/2"
Bolts
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
Maintenance Engineered Fastening Systems

Hex Cap Screw, Grade 9, Alloy Steel, Zinc Finish, Coarse Thread, 15/32" Head Height, 15/16" Across Flats, 5/8-11 x 7-1/2"
(Pack of 10)

Item#: A21122

Tru-Torq®

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Catalog page#: 11-7

Frequently Bought Together

DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M10-1.5 x 30mm

Item#: 61270
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 20mm

Item#: 59408
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 50mm

Item#: 28696
DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M6-1 x 25mm

Item#: 27332
DV_ZoomOriginal_P_30579_WB.jpg

Hex Cap Screw Grade 8 3/8-16 x 1-1/4"

Item#: FA68033
DV_ZoomOriginal_P_41484.jpg

Hex Cap Screw Grade 5 1/4-20 x 1/2"

Item#: FA65000
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 12mm

Item#: 28678
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 25mm

Item#: 28681
DV_ZoomOriginal_P_31311.jpg

Hex Nut Grade 8 Alloy Steel 1/4-20

Item#: A100
DV_ZoomOriginal_P_HT5290.jpg

2.1 Round Head Ratchet 3/8 Drive 168 Tooth

Item#: DY89285105
DV_ZoomOriginal_I_DY89320020.jpg

Cross-Over Socket Set, SAE, 3/8" Drive, 10pc

Item#: DY89320020
DV_ZoomOriginal_I_1588411.jpg

DTM High Build Seam Sealer White 10fl.oz

Item#: 1588411
DV_ZoomOriginal_P_519.jpg

Hex Nut Grade 8 Steel M12-1.75

Item#: 80250
DV_ZoomOriginal_P_2015.jpg

Hex Flange Nut Grade 8 Steel M8-1.25

Item#: 57129
DV_ZoomOriginal_P_33479.jpg

SAE J995C Locknut with Nylon Insert Grade 8 3/8-16

Item#: 53981
DV_ZoomOriginal_I_KT13321.jpg

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Item#: KT13321
DV_ZoomOriginal_I_KT12848.jpg

Bumper Clip Push-Type Retainer Nylon 18mm

Item#: KT12848
DV_ZoomOriginal_I_KT13527.jpg

Front Bumper Trim Panel/Running Board Split Rivet

Item#: KT13527

Product Description

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Technical Specifications

Item#: A21122
Style Premium
Diameter 5/8 "
Thread Pitch 11
Thread Coarse
Length 7-1/2 "
Type Hex Cap Screw
Across Flats 15/16 "
Material Alloy Steel
Grade 9
Finish Bright Zinc
Tensile Strength 180,000 PSI
Head Style High Hex
Head Height 15/32 "
Thread Form UNJ
Thread Length Partial
Thread Length Minimum 1-3/4 "
UNSPSC #: 31161501
TAA Compliant: Yes
Weight: 7.04 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm

Item#: 55603
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm

Item#: 55604
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm

Item#: 55602
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm

Item#: 55608
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 16mm

Item#: 28679
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm

Item#: 28687
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 12mm

Item#: 28678
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 25mm

Item#: 28681
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm

Item#: 59407
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm

Item#: 55607
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm

Item#: 55609

Your Recently Viewed Items