Home Fasteners Bolts Cap Screws Hex Cap Screw Grade 9 Alloy Steel 7/16-20 x 2"
Bolts
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
Maintenance Engineered Fastening Systems

Hex Cap Screw, Grade 9, Alloy Steel, Zinc Finish, Fine Thread, 21/64" Head Height, 5/8" Across Flats, 7/16-20 x 2"
(Pack of 50)

Item#: A850

Tru-Torq®

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Catalog page#: 11-6

Frequently Bought Together

DV_ZoomOriginal_P_30583.jpg

Hex Flange Bolt Grade 8 3/8-16 x 1-1/2"

Item#: 86395
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 25mm

Item#: 59413
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 25mm

Item#: 28693
DV_ZoomOriginal_I_FA65034_WB.jpg

Hex Cap Screw Grade 5 3/8-16 x 1-1/2"

Item#: FA65034
DV_ZoomOriginal_P_531_WB.jpg

JIS B1180 Hex Cap Screw Property Class 8.8 M12-1.25 x 70mm

Item#: 54646
DV_ZoomOriginal_P_6610.jpg

Hex Cap Screw Grade 10.9 Alloy Steel M10-1.5 x 50mm

Item#: 10228
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm

Item#: 59407
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_P_30780.jpg

Open End Rivet Dome Head Aluminum 1/8"

Item#: 41612
DV_ZoomOriginal_I_P10486.jpg

Flex-E-6001 Seam Sealer with Turbo Mixer

Item#: P10486
DV_ZoomOriginal_I_P30350.jpg

Round Mini Turbo Mixer with Integrated Nut

Item#: P30350
DV_ZoomOriginal_I_DY89310230.jpg

3Pc Adjustable/Pipe Wrench Set

Item#: DY89310230
DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M10-1.5 x 40mm

Item#: 61272
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 16mm

Item#: 59411
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 35mm

Item#: 28694
DV_ZoomOriginal_I_KT11580.jpg

Metric Indented Hex Head Bolt with 17mm Washer

Item#: KT11580
DV_ZoomOriginal_I_KT13984.jpg

Front Fender Push-Type Retainer Nylon 18mm

Item#: KT13984
DV_ZoomOriginal_I_KT13687.jpg

Rocker Molding Clip with Sealer Nylon Blue 17mm

Item#: KT13687

Product Description

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Technical Specifications

Item#: A850
Style Premium
Diameter 7/16 "
Thread Pitch 20
Thread Fine
Length 2 "
Type Hex Cap Screw
Across Flats 5/8 "
Material Alloy Steel
Grade 9
Finish Bright Zinc
Tensile Strength 180,000 PSI
Head Style High Hex
Head Height 21/64 "
Thread Form UNJ
Thread Length Partial
Thread Length Minimum 1-1/8 "
UNSPSC #: 31161501
TAA Compliant: Yes
Weight: 5.3 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm

Item#: 55603
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm

Item#: 55604
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm

Item#: 55602
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm

Item#: 55608
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 16mm

Item#: 28679
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm

Item#: 28687
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 12mm

Item#: 28678
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 25mm

Item#: 28681
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm

Item#: 59407
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm

Item#: 55607
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm

Item#: 55609

Your Recently Viewed Items