Hi-Load Masonry Anchor, Hex Bolt, Steel, Dichromate Zinc Finish, 14mm Drill Size, M10 x 100mm
(Pack of 2)

SKU:50504 Item#: 50504

Kent Automotive

• 8.8 metric grade steel with yellow dichromate zinc plating
• Exceptional strength coupled with the ability to resist vibratory loads
• Designed to equally distribute force to all sides
• Center plastic ring prevents anchor from spinning during installation
• Stud version can be adjusted for standoff height (shimming and leveling)
• Hex bolt version for applications where a finished appearance is required
• Removable; no cutting required
• Collapsible sleeve allows for secure clamping force
• Heavy-duty expansion sleeve provides follow-up expansion for fastening in tension zones of concrete such as under bridge decks, floor slabs and beams
• Designed for seismic (subject to or caused by an earthquake, vibration, strong impact or earth shaking) and dynamic (constant applied load) applications
• Applications include heavy machinery, conveyors, safety railings, dock bumpers and connecting structural components
Installation Procedure
1. Drill hole to correct diameter and depth.
2. Remove dust and rubble from hole with compressed air and a brush.
3. Using a hammer, tap the anchor through the material to be fastened until the anchor is firmly seated.
4. Tighten the anchor to the specified torque.
*Maximum values shown; use one-fourth of the ultimate tensile and shear capacities for the recommended 4:1 safety factor.

Check Availability

Usually Ships: Today

While Supplies Last

Quantity

Frequently Bought Together

Product Description

Technical Specifications

Item#:	50504
Length	100 mm
Type	Hi-Load Masonry Anchor
Drill Size	14 mm
Material	Carbon Steel
Maximum Fastened Material Thickness	25 mm
Reommended Torque	36 ft·lbf
Size	M10X100MM mm
Minimum Embedment	73 mm
Ultimate Shear Strength 4,000 PSI Concrete	8,905 lb
Diameter	M10
Ultimate Tensile Strength 4,000 PSI Concrete	6,788 lb
UNSPSC #:	31162101
TAA Compliant:	Yes
Weight:	0.54 lb