Hollow Wall Screw Anchor, Steel, Zinc Finish, Long Style, 1/8"
(Pack of
50)
SKU:25111 Item#: 25111
• Zinc rust-resistant finish
• Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Wallboard Anchor Assortment 1125Pcs
$0.00
Couldn't load pickup availability
Hollow Wall Screw Anchor Assortment 195Pcs
$0.00
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 240Pcs
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
$0.00
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M12
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Arrow Point Drywall Anchor Steel #10
$0.00
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/4"
$0.00
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head 3/8-16 x 6"
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish• Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25111 |
|---|---|
| Length | 2-3/8 " |
| Type | Wall Anchor |
| Size | 1/8 " |
| Body Diameter | 1/8 " |
| Diameter | 1/8 " |
| Material | Steel |
| Finish | Zinc |
| Anchor Size | 1/8 x 2-3/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 3/4 " |
| Wall Thickness | 1/8 to 3/4 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.98 lb |
