Hollow Wall Screw Anchor, Steel, Zinc Finish, Long Style, 3/8" Drill Size, #10-24
(Pack of
50)
SKU:25174 Item#: 25174
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Masonry Anchor Hex Washer Head Steel 1/4 x 1"
$0.00
Couldn't load pickup availability
Masonry Anchor TORX® Flat Head Steel 1/4 x 1-3/4"
$0.00
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/16 x 3-1/2"
$0.00
Couldn't load pickup availability
DIN 9021B Fender Washer Low Carbon Steel 18mm
$0.00
Couldn't load pickup availability
Hex Cap Screw Property Class 8.8 M10-1.5 x 40mm
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Tubular Anchor Plastic White #4 to #6
$0.00
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 3/16-24
$0.00
Couldn't load pickup availability
E-Z Toggleâ„¢ Self-Drilling Wall Anchor
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25174 |
|---|---|
| Length | 2-3/4 " |
| Type | Wall Anchor |
| Body Diameter | 5/16 " |
| Diameter | 3/16 " |
| Material | Steel |
| Screw Diameter | 10-24 (3/16) Long |
| Finish | Zinc |
| Drill Size | 3/8 " |
| Anchor Size | 3/16 x 2-3/4 " |
| Minimum Wall Thickness | 5/8 " |
| Maximum Wall Thickness | 1-1/4 " |
| Screw Length | 2-1/2 " |
| Wall Thickness | 3/4 to 1-1/4 " |
| Sleeve Length | 7/8 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 1.8 lb |
