Hollow Wall Screw Anchor, Steel, Zinc Finish, Short Style, 3/8" Drill Size, #10-24
(Pack of
50)
SKU:25173 Item#: 25173
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Wallboard Anchor Assortment 1125Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Open End Rivet Large Flange Head Aluminum 3/16"
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 10 Steel M10-1.5
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 1/8"
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 3"
$0.00
Couldn't load pickup availability
Tubular Anchor Plastic Blue #13 to #15
$0.00
Couldn't load pickup availability
Tubular Anchor Plastic Red #7 to #9
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25173 |
|---|---|
| Length | 3-3/8 " |
| Type | Wall Anchor |
| Body Diameter | 5/16 " |
| Diameter | 3/16 " |
| Material | Steel |
| Screw Diameter | 10-24 (3/16) Short |
| Finish | Zinc |
| Drill Size | 3/8 " |
| Anchor Size | 3/16 x 3-3/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 5/8 " |
| Screw Length | 2 " |
| Wall Thickness | 1/8 - 3/4 " |
| Sleeve Length | 3/8 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 1.54 lb |
