Instant Gasket Maker, Black, 10 oz Power Can, Paste Form
(Pack of
1)
SKU:27819 Item#: 27819
Return equipment to service and enhance productivity by making your own leakproof gaskets in just one minute. This innovative rubber gasket technology is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly, and is tack-free in five minutes.
• Can has easy dispensing lever and makes an average of 14 to 18 gaskets
• Resistant to oil, coolant, automatic transmission fluids and gear oil
• Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
• Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-91
Frequently Bought Together
LOCTITE PRISM 426 20G
$0.00
Couldn't load pickup availability
Flexseal Dispense-A-Gasket RTV Silicone Black 7.4oz
$0.00
Couldn't load pickup availability
Quick Mix Green Static Mixing Tip
$0.00
Couldn't load pickup availability
Peeler Citrus Pumice Hand Cleaner 1gal
$0.00
Couldn't load pickup availability
Rusty OS - Nut and Bolt Loosener and Rust Penetrant
$0.00
Couldn't load pickup availability
Leak Trace Powder Colorless 7.5oz
$0.00
Couldn't load pickup availability
Trash Can Liner Low Density 24 x 32"
$0.00
Couldn't load pickup availability
Trash Can Liner Low Density 43 x 47"
$0.00
Couldn't load pickup availability
Trash Can Liner High Density 43 x 48"
$0.00
Couldn't load pickup availability
Flexseal RTV Silicone Sealant Black 3oz
$0.00
Couldn't load pickup availability
Stop-Gap Flexible Sealant Grey 10.3oz
$0.00
Couldn't load pickup availability
Stop-Gap Flexible Sealant Black 10.3oz
$0.00
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
$0.00
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
$0.00
Couldn't load pickup availability
Product Description
Return equipment to service and enhance productivity by making your own leakproof gaskets in just one minute. This innovative rubber gasket technology is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly, and is tack-free in five minutes.• Can has easy dispensing lever and makes an average of 14 to 18 gaskets
• Resistant to oil, coolant, automatic transmission fluids and gear oil
• Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
• Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Technical Specifications
| Item#: | 27819 |
|---|---|
| Type | Sealant and Caulk |
| Container Type | Power Can |
| Color | Black |
| Size | 10 Oz. |
| Temperature Range | -58 to 392 °F |
| Physical Form | Paste |
| UNSPSC #: | 31201600 |
| TAA Compliant: | Yes |
| Weight: | 0.79 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
