Large Diameter Tapcon® Anchor, Carbon Steel, Zinc Finish, 1/2 x 3"
(Pack of
10)
• High performance, high production, self-threading anchor
• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability
Hollow Wall Screw Anchor Assortment 196Pcs
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
Couldn't load pickup availability
Open End Rivet Large Flange Head Aluminum 3/16"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 3/16 x 3-1/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head #14-10 x 2-1/4"
Couldn't load pickup availability
Large Diameter Tapcon® Anchor 1/2 x 5"
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
Couldn't load pickup availability
Product Description
• High performance, high production, self-threading anchor• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Technical Specifications
| Item#: | 26768 |
|---|---|
| Diameter | 1/2 " |
| Length | 3 " |
| Type | Screw Anchor |
| Drill Size | 7/16 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 1.98 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
