Lock Washer Self-Locking Steel 1/2"
(Pack of
10)
Resists loosening caused by vibration
Ease of assembly and disassembly
Locking function not affected by lubrication
Positive locking low or high preload levels
Minimum surface marring or scratching
Zinc flake coated with Delta Protekt® for superior corrosion resistance up to 6 times longer than standard zinc plating
Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Couldn't load pickup availability
Catalog page#: 11-30
Frequently Bought Together

Open End Rivet Large Flange Head Aluminum 3/16"
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M8-1.25 x 40mm
Couldn't load pickup availability

Lockbolt Collar Standard Flange Aluminum 3/16"
Couldn't load pickup availability

Lock Washer Self-Locking Steel 5/16" (M8)
Couldn't load pickup availability

3/8 Standard 316 SS Self Lock Washer
Couldn't load pickup availability

Lock Washer External Tooth 410 Stainless Steel #6
Couldn't load pickup availability

Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability

Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Air Distributor Defroster Push-Type Retainer
Couldn't load pickup availability

DIN 125A Flat Washer Steel M20
Couldn't load pickup availability

Flat Washer Thru-Hardened Steel M8
Couldn't load pickup availability

DIN 125A Flat Washer Grade 140 HV M7
Couldn't load pickup availability
Product Description
Resists loosening caused by vibration Ease of assembly and disassembly
Locking function not affected by lubrication
Positive locking low or high preload levels
Minimum surface marring or scratching
Zinc flake coated with Delta Protekt® for superior corrosion resistance up to 6 times longer than standard zinc plating
Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Technical Specifications
Item#: | 1473028 |
---|---|
Nominal Size | 1/2 " |
Type | Self-Locking Lock Washer |
Material | Carbon Steel |
I.D. | 0.53 " |
O.D. | 0.77 " |
Finish | Delta Protekt® |
Thickness | 0.10 " |
UNSPSC #: | 31161801 |
TAA Compliant: | Yes |
Weight: | 0.06 lb |
