Lock Washer Self-Locking Steel 1/4"
(Pack of
20.0)
Resists loosening caused by vibration
Ease of assembly and disassembly
Locking function not affected by lubrication
Positive locking low or high preload levels
Minimum surface marring or scratching
Zinc flake coated with Delta Protekt® for superior corrosion resistance up to 6 times longer than standard zinc plating
Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Couldn't load pickup availability
Catalog page#: 11-30
Frequently Bought Together

Hex Flange Bolt Grade 10.9 M6-1 x 12mm
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability

Lock Washer Non-Linking Steel 3/8"
Couldn't load pickup availability

DIN 137 Spring Washer Low Carbon Steel M8
Couldn't load pickup availability

DIN 137 Spring Washer Low Carbon Steel M7
Couldn't load pickup availability

Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability

High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability

Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability

Lock Washer 18-8 Stainless Steel 3/4"
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability

SAE Flat Washer Thru-Hardened Steel 7/16"
Couldn't load pickup availability
Product Description
Resists loosening caused by vibration Ease of assembly and disassembly
Locking function not affected by lubrication
Positive locking low or high preload levels
Minimum surface marring or scratching
Zinc flake coated with Delta Protekt® for superior corrosion resistance up to 6 times longer than standard zinc plating
Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Technical Specifications
Item#: | 1473017 |
---|---|
Nominal Size | 1/4 " |
Type | Self-Locking Lock Washer |
Material | Carbon Steel |
I.D. | 0.28 " |
O.D. | 0.45 " |
Finish | Delta Protekt® |
Thickness | 0.07 " |
UNSPSC #: | 31161801 |
TAA Compliant: | Yes |
Weight: | 0.03 lb |
