Masonry Anchor Hex Washer Head #14-10 x 2-1/4"
(Pack of
25)
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick
Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together

Masonry Anchor Star Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability

Sleeve Type Stud Bolt Anchor Steel 5/16 x 3-1/2"
Couldn't load pickup availability

Double Expansion Shield Anchor Alloy Steel 5/16"
Couldn't load pickup availability

Open End Rivet Large Flange Head Aluminum 3/16"
Couldn't load pickup availability

Hex Nut Grade 8 Steel M6-1
Couldn't load pickup availability

Hex Nut Grade 8 Steel M12-1.75
Couldn't load pickup availability

Masonry Anchor Hex Washer Head #14-10 x 1-3/4"
Couldn't load pickup availability

3/4x5 Mas-Tap Hd Anchor
Couldn't load pickup availability

3/4x6 Mas-Tap Hd Anchor
Couldn't load pickup availability

Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability

Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability

Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Product Description
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Technical Specifications
Item#: | 59657 |
---|---|
Diameter | #14 |
Length | 2-1/4 " |
Type | Crete-Flex |
Material | Stainless Steel |
Finish | Plain |
Thread Pitch | 10 tpi |
Drive | Hex |
Head Style | Hex Washer Head |
Drive Style | Hex |
UNSPSC #: | 31162104 |
TAA Compliant: | Yes |
Weight: | 0.67 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov


